WT3/T4 Turbo Kits for 86-88 BMW 325 Base Coupe 2D/Sedan 4D I6 SOHC M20 ENGINE

Application
1986-1988BMW 325 Base Sedan 4D 2.7L SOHC
1986-1988BMW 325 Base Coupe 2D 2.7L SOHC
1984-1987BMW 325e Base Coupe 2D 2.7L SOHC
1985-1987BMW 325e Base  Sedan 4D 2.7L SOHC
1986-1987BMW 325es Base Coupe 2D 2.7L SOHC
1989-1991BMW 325i Base Coupe 2D 2.7L SOHC
1987-1991BMW 325i Base Sedan 4D 2.5L SOHC
1987-1991BMW 325i Base Convertible 2D 2.5L SOHC
1988-1991BMW 325iX Base Coupe 2D 2.5L SOHC
1989-1991BMW 325iX Base Sedan 4D 2.5L SOHC
1987-1991BMW 325is Base Coupe 2D 2.5L SOHC
 

2.5L/2.7L I6 SOHC M20 EGGINE ONLY
More Info,please see thecompatibility charts.
1986-1988BMW 325 Base Sedan 4D 2.7L SOHC
1986-1988BMW 325 Base Coupe 2D 2.7L SOHC
1984-1987BMW 325e Base Coupe 2D 2.7L SOHC
1985-1987BMW 325e Base  Sedan 4D 2.7L SOHC
1986-1987BMW 325es Base Coupe 2D 2.7L SOHC
1989-1991BMW 325i Base Coupe 2D 2.7L SOHC
1987-1991BMW 325i Base Sedan 4D 2.5L SOHC
1987-1991BMW 325i Base Convertible 2D 2.5L SOHC
1988-1991BMW 325iX Base Coupe 2D 2.5L SOHC
1989-1991BMW 325iX Base Sedan 4D 2.5L SOHC
1987-1991BMW 325is Base Coupe 2D 2.5L SOHC
 

2.5L/2.7L I6 SOHC M20 EGGINE ONLY
More Info,please see thecompatibility charts.
Colorrandomly selected
100% Brand New, Never Used or Installed
Intercooler
Oversize: 25"X12"X3"
Coresize : 18"X11.75"X2.75"
3" Inlet and Outlet
Delta Fin
Tested to withstand more then 80PSI Pressure
150-350 Degree Temperature Drop
Intercooler Piping Kits
8 Sections of 2.5" Polished Aluminum Piping
2.5" Inlet Diameter, Increase More air flow
Need modification
2* 45 Degree Bends
2* 75 Degree Bends
2* 90 Degree Bends
2* Straights
10 Reinforced Blue Silicone Hose
2* 90 Couplers
6 *Straight Couplers
2* 2.5 to 3" silicone reducer
16* 2.5" Stainless T-Bolt Clamps
T3/T4 Turbo with Internal wastegate
3" Inlet Diameter
2" Outlet Diameter
Journal Bearing - Wet Float Type
T3 Flange
2.5" V-Band Outlet
Oil Lube/Cool
400 HP Capable
Compressor Wheel
0.50 A/R Cold Side, T04B Housing
Ind: 56.06 mm
Exd: 65.20 mm
Trim: 73.9
Turbine Wheel
0.58 5-Bolt Standard Hot Side
Ind: 70.00 mm
Exd: 54.14 mm
Stainless Steel Manifold
High quality CNC Machined Stainless Steel Manifold
Increase Engine Exhaust Output and Efficiency
Tubular Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder
TIG Welded
T3/T4 T3 Flange
2.5" V-band clamp
1XT304 clamp
2XT409 flanges
Type-RS Blow off Valve
2.5" Blow off Valve Adapter
Turbo Smart Style Manual Boost Controller 
Fuel Regulator 
Oil Catch Tank
Oil Return Line& Oil Feed Line
Turbo Timer
Exactly Same as the Picture Below
Professional Installer Is Highly Recommend(No Instruction Included)

Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.