Universal Turbo Charging Kit Small Engine Racing Go Kart ATV Bike Motorcycle

Type :  Turbo Charging Kit
Fitment : Custom Modification
***No installation manual, professional installation highly recommended
***Customers are responsible for other related hardware modifications and ECU tuning
Kit Contents # : 
GT1241 Turbo Charger (Perfect for 0.4~1.2 Liter 50~130 Horsepower applications)
2.5" 3-Bolt Downpipe Flange
2.5" Piping Set

Front Mount IntercoolerAdd to Cart

Coresize 11"X11.75"X2.75"
2.5" Inlet and Outlet
Tested to withstand more then 80PSI Pressure
150-350 Degree Temperature Drop

Oil Return Line Oil Feed LineAdd to Cart

Universal Fits T3 T3T4 T4 T70 T66 and almost All the Turbo Chargers (Oil Cooled Turbo only)
Universal Oil Return Line Kits AN-10 20Inch
Univeersal Oil Feed Kit 36" Steel Braided Line
Oil Feed Line+Return[drain] line
1/8 Size Oil Feed Line w/-4AN Fitting
24" Stainless Steel return line hose
Braided for heat and pressure resistance, strength and durability
M10x1.5 threads turbo restricter plate with 1/8 npt on top

Turbo -  GT1241 756068-5001Add to Cart

Approximate HP 50-130HP (0.4L~1.2L)
Maybe need modification
Turbo Charger GT1241 756068-5001
Aftermarket product
Journal Bearing
Oil & Water cooling
Single turbine housing inlet port
w/Internal Wastegate 7.03PSI
Compress
IND 28.99mm
0.33 A/R
Trim 50
6 Blades
Turbine
EXD 30.12mm
0.43 A/R
Trim 72
12 Blades
Please check the following REF#756068-5001

2.5"   3 -Bolt   Downpipe Flange
Made of high quality T304 stainless steel. Direct bolt on this turbo charger. You can use this flange to weld one pipe, and custom make the downpipe for this turbo kit
 
  2.5" Piping SetAdd to Cart

(2) U-bend pipes at 6.5" diam.
(2) 28" in. pipes consisting of a short 90 deg. angle and a 45 deg. angle. 
(2) standard couplers with 2" ID. 
(4) reducing couplers with 2" ID to a 2.5" ID. 
(8) 2.5" stainless t-clamps. 
(4) 3.0" stainless t-clamps. 
All piping has  2.0" OD Inlet/Outlet.

2.5" Cold Air Intake Filter Turbo Application Universal Blue Add to Cart

Made of High Quality Foam with SS Mesh surround
Fits 2.5" Cold Air Intake, Turbo Application and Shore Ram Intakes
6" Overall Length

Made of high-quality CNC billet T6061 aluminum housing for heat disbursement, includes stainless steel hardware bolts, inconel base housing with forged stainless steel valves construction. Heavy duty actuator springs withstands temperatures up to 490 degrees Celsius. Set at 7PSI, adjustable spring rate with use of any boost controller

Legal Disclaimer :
We make no claims as to emission performance for street or highway use. Some equipment is not sold for street use in any state or country where state or federal regulations prohibit its use. Some items listed in the online catalog are intended for off road use and for purpose built race cars only. We do not make any claims of street legal use of these products that are not intended for use on public roads.

Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.